Ohio Rod Products - Long Length Fastener Solutions

Tel: 812-689-6565
E-mail: info@ohiorod.com
www.ohiorod.com

Pilot Hole Sizes

Lo-Driv & Tri Round Recommended Pilot Holes Sizes - Inch Screws
Material Thickness Inch Nominal Screw Size Diameter - TPI	Inch Approx. US Gauge Material	.020 - .055 26 - 17 Diameter	.061 - .122 16 - 11 Diameter	.125 - .245 11 - 3 Diameter	.250 - .312 3 - 5/16" Diameter	.313 - .500 5/16" - 1/2" Diameter
4 - 40	Steel* Aluminum**	.098 .098	.102 .100	.104 .102	.	.
6 - 32	Steel Aluminum	.120 .120	.120 .120	.125 .125	.128 .125	.
8 - 32	Steel Aluminum	.	.147 .147	.150 .150	.154 .152	.
10 - 24	Steel Aluminum	.	.166 .166	.172 .166	.177 .170	.
10 - 32	Steel Aluminum	.	.173 .173	.177 .173	.180 .177	.
12 - 24	Steel Aluminum	.	.193 .191	.199 .196	.203 .199	.
1/4 - 20	Steel Aluminum	.	.219 .219	.224 .221	.228 .224	.234 .228
5/16 - 18	Steel Aluminum	.	.	.281 .278	.288 .284	.290 .286
3/8 - 16	Steel Aluminum	.	.	.342 .339	.348 .343	.350 .343
Lo-Driv & Tri Round Recommended Pilot Holes Sizes - MetricScrews
Material Thickness Nominal Screw Size Dia. Pitch	Millimeters Material	.05 - 1.2 Diameter	1.3 - 2.4 Diameter	2.5 - 4.0 Diameter	4.1 - 5.9 Diameter	6.0 - 8.1 Diameter
M3 x 0.5	Steel	2.72	2.74	2.77	.	.
M4 x .07	Steel	3.58	3.60	3.63	3.68	.
M5 x 0.8	Steel	.	4.55	4.57	4.60	4.65
M6 x 1.0	Steel	.	5.41	5.46	5.51	5.54
M7 x 1.0	Steel	.	.	6.45	6.51	6.58
M8 x 1.25	Steel	.	.	7.31	7.39	7.47
M10 x 1.50	Steel	.	.	9.10	9.17	9.27
* Steel: Low carbon sheet and bar; average Rockwell - "B" 55 - 75. Aluminum: Aluminum sheet and bar (including aluminum and zinc die castings and all alloys in Rockwell "B" hardness range from 40 - 70) and other ductile materials of similar hardness, such as brass, bronze, etc. Note:** Special materials and applications may warrant special hole sizes. Information available upon request.

Ohio Rod Products
Post Office Box 416
1415 S. Benham Road, Versailles, IN 47042-0416
Tel. 812-689-6565 • Fax 812-689-6635
E-mail: info@ohiorod.com
www.ohiorod.com