Stress
Area
(1)
in. ²

Stress Area

mm2

Class
4.6
Clamp Load

kN

Class 4.6
Torque
Dry
k=0.2
N-m

Class
4.8
Clamp Load

kN

Class 4.8
Torque
Dry
k=0.2
N-m

Class
5.8
Clamp Load

kN

Class 5.8
Torque
Dry
k=0.2
N-m

Stress Area

mm2

Class
8.8
Clamp Load

kN

Class 8.8
Torque
Dry
k=0.2
N-m

Class
9.8
Clamp Load

kN

Class 9.8
Torque
Dry
k=0.2
N-m

Class 10.9
Clamp Load

kN

Class 10.9
Torque
Dry
k=0.2
N-m

NOTE: The stress area of threaded series not included in Table 2 may be computed from the equation: As=0.7854 (D - 0.9382P)2 WHERE: As=Stress area in mm2 D=Diameter in mm P=Pitch in mm

CAUTION: The previously listed torque and resulting tension are provided as an advisory guide. Individual application discretion is recommended. The content, has been presented as accurately as possible, but responsibility for its application lies with the user, and Ohio RodProducts is not responsible for any loss, claim, or damage arising there from. A complete discussion and tutorial on Torque Tensioning is available from Ohio Rod Products by request.